What is Building Integrated PV

Building Integrated PV(BIPV) is a new concept of solar power generation. Simply speaking, solar photovoltaic power generation square array is installed on the outer surface of the building envelope to provide power. According to the different ways of combining photovoltaic array with buildings, building Integrated PV can be divided into two categories: one is the combination of photovoltaic array and buildings. The other is the integration of photovoltaic array and building, such as photoelectric tile roof, photoelectric curtain wall and photoelectric lighting roof. In these two ways, the combination of photovoltaic arrays and buildings is a common form, especially with the roof of buildings. Because the combination of photovoltaic array and building does not occupy additional ground space, it is the best installation method of photovoltaic power generation system widely used in cities, so it attracts much attention. The integration of photovoltaic arrays and buildings is an advanced form of BIPV, which requires higher requirements for photovoltaic modules. Photovoltaic modules should not only meet the functional requirements of photovoltaic power generation, but also take into account the basic functional requirements of buildings.

According to the different ways of combining photovoltaic arrays with buildings, building Integrated PV can be divided into two categories:

1.The combination of photovoltaic array and architecture.
In this way, the photovoltaic array is attached to the building, which acts as the carrier of the photovoltaic array and plays a supporting role. The further combination of photovoltaic arrays and buildings is the integration of photovoltaic devices and building materials. The general building envelope surface uses paint, decorative tile or curtain wall glass, the purpose is to protect and decorate the building. If photovoltaic devices are used instead of some building materials, that is, photovoltaic modules are used to make roofs, exterior walls and windows of buildings, so that they can be used as building materials as well as power generation, which is perfect. For frame structure buildings, the whole envelope structure can be made into photovoltaic arrays, and appropriate photovoltaic modules can absorb both direct sunlight and reflected sunlight. At present, a large-scale color photovoltaic module has been developed, which can achieve the above objectives and make the appearance of the building more attractive.

2.The integration of photovoltaic array and building.
This way is that photovoltaic modules appear in the form of a building material, and photovoltaic arrays become an integral part of the building.

SPS3115C Series 1-10KVA outdoor solar system

1.Pure sine wave inverter
2.Built-in MPPT solar charge controller
3.Could be built-in battery
4.Protection degree:IP55
5.Configurable input voltage range for home appliances and personal computers via LCD setting
6.Configurable AC/Solar Charger priority via LCD setting
7.Compatible to mains voltage or generator power
8.Auto restart while AC is recovering
9.Overload/Over temperature/short circuit protection
10.Configurable battery charging current based on applications via LCD setting

评论

发表评论

此博客中的热门博文

Correct selection of backup time for UPS

图片
UPS backup time is generally a problem concerned by customer in the purchase process. Usually most people prefer to choose the  UPS  which power backup the longer the better, in fact, this is not correct. We must firstly clear that the seller will usually have standard type UPS and long-acting UPS. Standard type UPS with built-in battery, after a power interruption can supply power to the load equipment in general for a few minutes to tens of minutes, of course, the length of time depends on the load. Long acting UPS can not only meet the power requirement of load, but also meet the requirements of customers and work types and so on, so the long-term UPS is usually equipped with an external battery pack. If the client is not particularly strict to the work condition of the load, and the power of the load is not particularly large, usually with standard type UPS would be enough. Because the choice of long backup time UPS is bound to increase the number of battery groups an...
阅读全文

126th Canton Fair

图片
On Oct 15th 2019, as one of the most important trade promotion platforms for Chinese enterprises to expand the global market, Canton Fair in Guangzhou focused on highlighting innovation driven, and “independent brand” became a high-frequency word of Canton Fair. Xu Bing, a spokesman for the Canton Fair and deputy director of the China Foreign Trade Center, said that the domestic and foreign environment faced by China’s foreign trade development this year is more complex and uncertain. The majority of exhibitors accelerated quality improvement and innovation, and continued to make efforts in technology research and development, product innovation, brand cultivation, etc., with high technology, high quality, high added value and independent brand products emerging. Many independent innovative R & D products are welcomed by the market. At the same time, purchasers are less sensitive to price and pay more attention to the technology, brand, quality and service of products. In ...
阅读全文

How to maximize the efficiency of your UPS

图片
1.Use of AC voltage regulator After using  UPS power supply , there is no need to add AC voltage regulator. If it must be added, it should be added to the front level of UPS, that is, the mains power first passes through the AC voltage regulator, then through the ups, and then to the load. 2.Battery balanced charging skills At present, valve regulated lead-acid battery (VRLA) used in many ups power supply is called maintenance free battery from the beginning, which gives users a misunderstanding that it seems that this battery is durable and does not need maintenance at all. Under this kind of misleading, many users have not carried out maintenance and management since they installed the battery. When the battery in UPS power supply meets the following conditions, the battery shall be charged evenly: when the terminal voltage is lower than the specified calibration voltage due to excessive discharge. For 12 V small sealed lead-acid batteries, the discharge calibration voltage is...
阅读全文