Advantages of Micro Inverter

The common structure of on grid solar power generation system includes centralized, series, multi-series and AC modules. In centralized, series and multi-series systems, there are series and parallel solar cell modules, so the maximum power point tracking of the system is aimed at the whole series-parallel solar cell array, which can not take into account each solar cell array in the system. The utilization of single solar cell array is low, the system has poor ability to resist local shadows, and the system expansion flexibility is not enough. The solar on grid micro-inverters are connected with a single solar cell module, which can directly convert the DC output of the solar cell module into AC and transmit it to the grid. They have the following advantages:
1.It ensures that each solar cell module runs at the maximum power point, and has a strong ability to resist local shadows.
2.By integrating micro-inverters with solar cell modules, can realize modular design, plug-and-play and hot plug-and-play, while the system expansion is simple and convenient.
3.Micro-inverters do not occupy installation space independently. Distributed installation is easy to configure. They can make full use of space and adapt to different installation directions and angles.
4.The system has high redundancy and reliability, and the failure of a single module will not affect the whole system.

SSP3115C 1-12KVA Low Frequency Pure Sine Wave Inverter with MPPT Solar Charge Controller

1. Built-in MPPT solar controller
2. Pure sine wave output
3. The charging current is big up to 85 Amp
4. Output power factor:s 0.9-1
5. Well accept generator’s output
6. Full automatical and silent operation
7. Automatically transfer between battery and line modes
8. Microprocessor control guarantees high reliability
9. Remote control function
10. Four-steps intelligent charging control to recharging time
11. Bypass and bypass voltage regulation function
12. With AVR function (optional)
13. Mains/solar output priority level for the customer to choose .
14. Mains/solar/ mains & solar charging three mode of priorities for the customer to choose .
15. Battery type can choose from 0-9

评论

发表评论

此博客中的热门博文

Correct selection of backup time for UPS

图片
UPS backup time is generally a problem concerned by customer in the purchase process. Usually most people prefer to choose the  UPS  which power backup the longer the better, in fact, this is not correct. We must firstly clear that the seller will usually have standard type UPS and long-acting UPS. Standard type UPS with built-in battery, after a power interruption can supply power to the load equipment in general for a few minutes to tens of minutes, of course, the length of time depends on the load. Long acting UPS can not only meet the power requirement of load, but also meet the requirements of customers and work types and so on, so the long-term UPS is usually equipped with an external battery pack. If the client is not particularly strict to the work condition of the load, and the power of the load is not particularly large, usually with standard type UPS would be enough. Because the choice of long backup time UPS is bound to increase the number of battery groups an...
阅读全文

126th Canton Fair

图片
On Oct 15th 2019, as one of the most important trade promotion platforms for Chinese enterprises to expand the global market, Canton Fair in Guangzhou focused on highlighting innovation driven, and “independent brand” became a high-frequency word of Canton Fair. Xu Bing, a spokesman for the Canton Fair and deputy director of the China Foreign Trade Center, said that the domestic and foreign environment faced by China’s foreign trade development this year is more complex and uncertain. The majority of exhibitors accelerated quality improvement and innovation, and continued to make efforts in technology research and development, product innovation, brand cultivation, etc., with high technology, high quality, high added value and independent brand products emerging. Many independent innovative R & D products are welcomed by the market. At the same time, purchasers are less sensitive to price and pay more attention to the technology, brand, quality and service of products. In ...
阅读全文

How to maximize the efficiency of your UPS

图片
1.Use of AC voltage regulator After using  UPS power supply , there is no need to add AC voltage regulator. If it must be added, it should be added to the front level of UPS, that is, the mains power first passes through the AC voltage regulator, then through the ups, and then to the load. 2.Battery balanced charging skills At present, valve regulated lead-acid battery (VRLA) used in many ups power supply is called maintenance free battery from the beginning, which gives users a misunderstanding that it seems that this battery is durable and does not need maintenance at all. Under this kind of misleading, many users have not carried out maintenance and management since they installed the battery. When the battery in UPS power supply meets the following conditions, the battery shall be charged evenly: when the terminal voltage is lower than the specified calibration voltage due to excessive discharge. For 12 V small sealed lead-acid batteries, the discharge calibration voltage is...
阅读全文