How to select the solar controller of street lamp

There are a wide variety of MPPT solar controllers, and the selection of suitable models for solar street lamps needs to be taken into consideration in several aspects.
1.The power and voltage of a solar component.
If the solar panels below 120W/18V, 10A controller is OK, if 120V/18V~240W/18V solar panels, then use 20A street lamp controller.
2.Whether the LED light source has a built-in drive power. If the light source itself does not drive the power supply, then the constant current control unit with constant current should be selected. If the light source itself is powered by the power, then the ordinary type of solar street lamp controller should be chosen.
3.The light source with drive to see the arrangement of the lamp. If the 3 series is in parallel, the step-down constant current control unit is used, if it is more than 5 series, the lifting type constant current control unit is used.
4.According to the use of the environment. If it is outdoor, and there is no special sealing box, it is necessary to use the full waterproof IP68 grade solar energy street lamp controller. If there is a special sealing box, also can choose the plastic shell IP32 grade solar street lamp controller.

SOROTEC MPPT Solar Charge Controller 12V 24V 48V 60A 3200W

1. Intelligent maximum power point tracking technology increases efficiency 25%~30%
2. Compatible for PV systems in 12v, 24v or 48v
3. Three-stage charging optimizes battery performance
4. Maximum charging current up to 60a
5. Maximum efficiency up to 98%
6. Battery temperature sensor (BTS) automatically provides temperature compensation
7. Support wide range of lead-acid batteries including wet, AGM, and gel batteries
8. Multi-function LCD displays detailed information

评论

发表评论

此博客中的热门博文

How to maximize the efficiency of your UPS

图片
1.Use of AC voltage regulator After using  UPS power supply , there is no need to add AC voltage regulator. If it must be added, it should be added to the front level of UPS, that is, the mains power first passes through the AC voltage regulator, then through the ups, and then to the load. 2.Battery balanced charging skills At present, valve regulated lead-acid battery (VRLA) used in many ups power supply is called maintenance free battery from the beginning, which gives users a misunderstanding that it seems that this battery is durable and does not need maintenance at all. Under this kind of misleading, many users have not carried out maintenance and management since they installed the battery. When the battery in UPS power supply meets the following conditions, the battery shall be charged evenly: when the terminal voltage is lower than the specified calibration voltage due to excessive discharge. For 12 V small sealed lead-acid batteries, the discharge calibration voltage is 10.
阅读全文

126th Canton Fair

图片
On Oct 15th 2019, as one of the most important trade promotion platforms for Chinese enterprises to expand the global market, Canton Fair in Guangzhou focused on highlighting innovation driven, and “independent brand” became a high-frequency word of Canton Fair. Xu Bing, a spokesman for the Canton Fair and deputy director of the China Foreign Trade Center, said that the domestic and foreign environment faced by China’s foreign trade development this year is more complex and uncertain. The majority of exhibitors accelerated quality improvement and innovation, and continued to make efforts in technology research and development, product innovation, brand cultivation, etc., with high technology, high quality, high added value and independent brand products emerging. Many independent innovative R & D products are welcomed by the market. At the same time, purchasers are less sensitive to price and pay more attention to the technology, brand, quality and service of products. In
阅读全文

Why the IDC needs to be equipped with UPS

图片
The equipment in  IDC  is very important. Servers, computers, monitoring and so on, all above need to be ensured normal power supply, especially the transmission and reception of data on the network. These are all used for servers, so the reliability of servers is guaranteed. Sudden power failure, instant voltage and current at incoming calls will be very high. Some precision equipment can be burnout through this instant impact.  UPS  has voltage stabilizing function and its existence protects the safety of these devices under such circumstances.The process of some work can not be blackout, such as operation, test, scientific research, charge and so on. These places must be protected by UPS power supply. The role of UPS power is to enable us to have enough time to store data in the case of some urgent outages, and also that is UPS. It is also the UPS’s voltage stabilizing function that can effectively protect the electrical safety of the equipment. How to choose UPS？ 1.Determine the
阅读全文