Soft switching and electrical level technology

The soft switching technology makes use of the resonance principle to change the current or voltage in the switching device according to the sine law. When the current is over zero, the device is turned off; When the voltage is zero, the device is turned on. Thus, the switching loss is reduced, and the problems of inductive shutdown and capacitive opening are greatly solved. When the voltage at the ends of the switch tube or the current flowing through the switch tube is zero, the switch is switched on or off so that there is no switching loss in the switch tube.
The soft switching resonant converter is composed of inductors and capacitors. The resonant circuit increases the number of devices. The system becomes complex and the reliability is reduced; Since the power factor of commercial solar inverter is 1, the soft switching technique is only suitable for the DC-DC transform in the first stage, and the post stage DC-AC converter also requires electrical multilevel technology.
According to the electrical level of the output voltage, the inverter can be divided into two electrical levels and electrical multilevel. The main advantages of the two electrical level converter are as follows: simple circuit structure, small in number of capacitors and small in occupation. However, due to the high voltage required by the two electrical level inverter device, the switching loss is large. In order to avoid the above technical problems, electrical multilevel technology has begun to appear and has attracted more and more attention. The so-called electrical multilevel refers to the output voltage waveform in the electrical level of equal to or greater than 3 of the converter, such as three electrical level, five electrical level, seven electrical level and so on. The electrical multilevel converter reduces the voltage of the two electrical level to the two ends of the switching device, and can reduce the switching loss of the switching device by the proper modulation mode, while maintaining the lower harmonic on the AC side.

SSP3118C4 2KVA ~ 5KVA Solar Inverter Wall Mounted Integrated with PWM/MPPT Controller

1.Pure sine wave inverter
2.Cold start function
3.Auto restart while AC is recovering
4.Overload and short circuit protection
5.Optional remote panel available
6.Selectable charging current based on applications
7.Configurable AC/Solar input priority via LCD setting
8.Compatible to mains voltage or generator power
9.Smart battery charger design for optimized battery performance
10.Parallel operation with up to 6 units only available for 4KVA/5KVA
11.Selectable input voltage range for home appliances and personal computers
Learn More about 2kva inverter

评论

发表评论

此博客中的热门博文

Correct selection of backup time for UPS

图片
UPS backup time is generally a problem concerned by customer in the purchase process. Usually most people prefer to choose the  UPS  which power backup the longer the better, in fact, this is not correct. We must firstly clear that the seller will usually have standard type UPS and long-acting UPS. Standard type UPS with built-in battery, after a power interruption can supply power to the load equipment in general for a few minutes to tens of minutes, of course, the length of time depends on the load. Long acting UPS can not only meet the power requirement of load, but also meet the requirements of customers and work types and so on, so the long-term UPS is usually equipped with an external battery pack. If the client is not particularly strict to the work condition of the load, and the power of the load is not particularly large, usually with standard type UPS would be enough. Because the choice of long backup time UPS is bound to increase the number of battery groups an...
阅读全文

126th Canton Fair

图片
On Oct 15th 2019, as one of the most important trade promotion platforms for Chinese enterprises to expand the global market, Canton Fair in Guangzhou focused on highlighting innovation driven, and “independent brand” became a high-frequency word of Canton Fair. Xu Bing, a spokesman for the Canton Fair and deputy director of the China Foreign Trade Center, said that the domestic and foreign environment faced by China’s foreign trade development this year is more complex and uncertain. The majority of exhibitors accelerated quality improvement and innovation, and continued to make efforts in technology research and development, product innovation, brand cultivation, etc., with high technology, high quality, high added value and independent brand products emerging. Many independent innovative R & D products are welcomed by the market. At the same time, purchasers are less sensitive to price and pay more attention to the technology, brand, quality and service of products. In ...
阅读全文

How to maximize the efficiency of your UPS

图片
1.Use of AC voltage regulator After using  UPS power supply , there is no need to add AC voltage regulator. If it must be added, it should be added to the front level of UPS, that is, the mains power first passes through the AC voltage regulator, then through the ups, and then to the load. 2.Battery balanced charging skills At present, valve regulated lead-acid battery (VRLA) used in many ups power supply is called maintenance free battery from the beginning, which gives users a misunderstanding that it seems that this battery is durable and does not need maintenance at all. Under this kind of misleading, many users have not carried out maintenance and management since they installed the battery. When the battery in UPS power supply meets the following conditions, the battery shall be charged evenly: when the terminal voltage is lower than the specified calibration voltage due to excessive discharge. For 12 V small sealed lead-acid batteries, the discharge calibration voltage is...
阅读全文