Maintenance of solar grid connected inverter

Grid connected solar inverters generally have 5~10 years of service life, and if it is used and maintained improperly, will seriously shorten the life of solar grid connected inverter, and even bring security risks.
First of all, according to usage requirements, need to determine the technical parameters of product, and then installed by professional technicians, and after approved by the local power sector, before the product can be connected into the power grid, put into use.
The input and output terminals for daily use need to regularly check the product is connected firmly, input and output cable whether aging or damaged skin scratch, grounding wire is strong, whether there is a break or fall off, should be found for professional replacement. Do not arbitrarily remove the input and output terminals and their protective cover. Should avoide exposure of the live metal parts of the input and output terminals.
When daily use, as the inverter fails, the connection protection switch for the power grid shall be disconnected immediately, and the inverter can be turned on again after the professional has been removed from the power grid.
The maintenance of the product to should be operated by technical personnel, before any maintenance work, should firstly disconnect the grid connected solar system inverter, then disconnect the DC electrical connection, wait at least 5 minutes until the internal components of discharge is completed before the repair work.
Non professionals should not disassemble the product shell, when professional personnel in maintenance, shall comply with the warning signs, should wear anti-static gloves, to avoid unnecessary contact with the circuit board, also note that exposed hands do not touch the inverter’s power devices and heat abstractor directly, after a period of time, there are still high temperature.
In the daily use, the product should be in a good ventilation environment. It can clean the product surface and the air inlet and outlet dust with a clean and soft dry cloth regularly, and keep the good heat dissipation of the product.

SSP3119C 1-5KVA On/off Grid Hybrid Solar Inverter with Energy Storage

■Pure sine wave output
■Self-consumption and Feed-in to the grid
■Programmable supply priority for PV, Battery or Grid
■User-adjustable charging current and voltage
■Monitoring software for real-time status display and control
■Parallel operation up to 6 units only for 3K/4K/5K models
■Programmable multiple operation modes: Grid-tie,off-grid and grid-tie with backup
On Off Grid Hybrid Solar Power Inverter with battery pack,high frequency pure sine wave output, PF.=1.0, parallel working Max 6units(30KW) – SSP3119C 1-5KVA

评论

发表评论

此博客中的热门博文

Correct selection of backup time for UPS

图片
UPS backup time is generally a problem concerned by customer in the purchase process. Usually most people prefer to choose the  UPS  which power backup the longer the better, in fact, this is not correct. We must firstly clear that the seller will usually have standard type UPS and long-acting UPS. Standard type UPS with built-in battery, after a power interruption can supply power to the load equipment in general for a few minutes to tens of minutes, of course, the length of time depends on the load. Long acting UPS can not only meet the power requirement of load, but also meet the requirements of customers and work types and so on, so the long-term UPS is usually equipped with an external battery pack. If the client is not particularly strict to the work condition of the load, and the power of the load is not particularly large, usually with standard type UPS would be enough. Because the choice of long backup time UPS is bound to increase the number of battery groups an...
阅读全文

126th Canton Fair

图片
On Oct 15th 2019, as one of the most important trade promotion platforms for Chinese enterprises to expand the global market, Canton Fair in Guangzhou focused on highlighting innovation driven, and “independent brand” became a high-frequency word of Canton Fair. Xu Bing, a spokesman for the Canton Fair and deputy director of the China Foreign Trade Center, said that the domestic and foreign environment faced by China’s foreign trade development this year is more complex and uncertain. The majority of exhibitors accelerated quality improvement and innovation, and continued to make efforts in technology research and development, product innovation, brand cultivation, etc., with high technology, high quality, high added value and independent brand products emerging. Many independent innovative R & D products are welcomed by the market. At the same time, purchasers are less sensitive to price and pay more attention to the technology, brand, quality and service of products. In ...
阅读全文

How to maximize the efficiency of your UPS

图片
1.Use of AC voltage regulator After using  UPS power supply , there is no need to add AC voltage regulator. If it must be added, it should be added to the front level of UPS, that is, the mains power first passes through the AC voltage regulator, then through the ups, and then to the load. 2.Battery balanced charging skills At present, valve regulated lead-acid battery (VRLA) used in many ups power supply is called maintenance free battery from the beginning, which gives users a misunderstanding that it seems that this battery is durable and does not need maintenance at all. Under this kind of misleading, many users have not carried out maintenance and management since they installed the battery. When the battery in UPS power supply meets the following conditions, the battery shall be charged evenly: when the terminal voltage is lower than the specified calibration voltage due to excessive discharge. For 12 V small sealed lead-acid batteries, the discharge calibration voltage is...
阅读全文