Usage environment and load are two main factors to be considered in selecting industrial UPS

Physical environment is usually neglected when UPS is selected by industrial enterprises. Due to the influence of production and manufacturing site factors, there are many problems in industrial application environment, such as high temperature, humidity, large amount of dust and serious air pollution. In special industrial occasions, the air in the environment may also contain corrosive gases, or the body inclines in the case of vibration, which may easily lead to short-circuit of UPS internal components and power supply failure. Therefore, UPS need to have a strong environmental adaptability, to respond to the test of harsh environment with comprehensive performance.
From the point of view of electrical environment, the precise production equipment of the production line always has very stringent requirements for power supply. Power grid pollution in industrial application site is very serious, and it often faces special power supply and special industry standards. As the core of industrial power supply system, industrial UPSshould be able to provide high-quality power to the load under any load and power supply conditions, eliminate the impact of instantaneous interruption of power grid and various radio disturbances on industrial equipment system, effectively prevent the harm of overvoltage of power grid to the load, and ensure the reliable operation of key industrial processes and control.
Load characteristics are an important factor affecting the selection of industrial grade UPS. In industrial automation production, due to the variety of types of electrical equipment, large differences, and complex load characteristics, the total load is often inductive, and the current fluctuation is relatively large, which will have a greater impact on the power supply. Therefore, the steady-state current and transient peak current and duration of the load are an important consideration when selecting an UPS for inductive or hybrid loads that exceed the UPS output power factor range. Due to improper consideration of the UPS power, the customer’s funds are wasted, and if the selected industrial UPS power supply is too small it will have an impact on reliable load protection. These are the ones we should avoid when choosing.

SOROTEC IPS9312 IPS9332 10-160KVA Industrial UPS system

■Adopt full digital control technology.
■Intelligent detection and monitoring function.
■Digital control and static switch zero switching.
■Input/output full isolation
■DC UPS isolated with utility power completely.
■Cubicle design with power standard.
■Multifunctional protection for overvoltage,low voltage,
■Overcurrent, short circuit and so on.
■Large-screen LCD monitor Chinese and English operation interface.
■Ultralong 256 event records, user-friendly analysis and management to the situation of power supply.
■Static bypass has a strong anti-overload capacity.

评论

发表评论

此博客中的热门博文

Correct selection of backup time for UPS

图片
UPS backup time is generally a problem concerned by customer in the purchase process. Usually most people prefer to choose the  UPS  which power backup the longer the better, in fact, this is not correct. We must firstly clear that the seller will usually have standard type UPS and long-acting UPS. Standard type UPS with built-in battery, after a power interruption can supply power to the load equipment in general for a few minutes to tens of minutes, of course, the length of time depends on the load. Long acting UPS can not only meet the power requirement of load, but also meet the requirements of customers and work types and so on, so the long-term UPS is usually equipped with an external battery pack. If the client is not particularly strict to the work condition of the load, and the power of the load is not particularly large, usually with standard type UPS would be enough. Because the choice of long backup time UPS is bound to increase the number of battery groups an...
阅读全文

126th Canton Fair

图片
On Oct 15th 2019, as one of the most important trade promotion platforms for Chinese enterprises to expand the global market, Canton Fair in Guangzhou focused on highlighting innovation driven, and “independent brand” became a high-frequency word of Canton Fair. Xu Bing, a spokesman for the Canton Fair and deputy director of the China Foreign Trade Center, said that the domestic and foreign environment faced by China’s foreign trade development this year is more complex and uncertain. The majority of exhibitors accelerated quality improvement and innovation, and continued to make efforts in technology research and development, product innovation, brand cultivation, etc., with high technology, high quality, high added value and independent brand products emerging. Many independent innovative R & D products are welcomed by the market. At the same time, purchasers are less sensitive to price and pay more attention to the technology, brand, quality and service of products. In ...
阅读全文

How to maximize the efficiency of your UPS

图片
1.Use of AC voltage regulator After using  UPS power supply , there is no need to add AC voltage regulator. If it must be added, it should be added to the front level of UPS, that is, the mains power first passes through the AC voltage regulator, then through the ups, and then to the load. 2.Battery balanced charging skills At present, valve regulated lead-acid battery (VRLA) used in many ups power supply is called maintenance free battery from the beginning, which gives users a misunderstanding that it seems that this battery is durable and does not need maintenance at all. Under this kind of misleading, many users have not carried out maintenance and management since they installed the battery. When the battery in UPS power supply meets the following conditions, the battery shall be charged evenly: when the terminal voltage is lower than the specified calibration voltage due to excessive discharge. For 12 V small sealed lead-acid batteries, the discharge calibration voltage is...
阅读全文