Matters needing attention when installing solar controller and inverter in solar system

The installation personnel of the solar power generation system should carefully read and observe the manufacturer’s instructions. Therefore, when installing the solar controller, the solar array should be covered with opaque cloth, and the load will be disconnected to protect the equipment and installation personnel, and the installation position should be well ventilated, so as to prevent the heat dissipation components from being too high. The solar inverter and the controller are much the same. But it should be noted that when it connects the DC cable to the inverter input terminal, we must pay attention to the polarity of the inverter and confirm that the positive and negative polarity have been accessed correctly. In addition, the specific wiring and debugging methods of the solar MPPT charge controller and inverter need to be detailed to refer to the technical instructions carried by the solar photovoltaic system.

SOROTEC Solar MPPT Charge Controller

1.Adopt advanced MCU microprocessor control technology.
2.12v/24v self detect to choose output voltage.
3. Advanced MPPT technology ,High converting efficiency higher than 97% for minimizing energy loss.
4.Capable of selecting different charging mode for various type of batteries
5.capable of connecting additional DC load for wide applications.
6.Three stage charge control system(bulk , absorption, and float mode)with optional temperature compensation.
7.LED indicators display charge status in real time.
8.Pulse Width Modulation(PWM)technology combined with a multi-stage charge control algorithm leads to superior charging and enhanced battery performances.

评论

发表评论

此博客中的热门博文

Correct selection of backup time for UPS

图片
UPS backup time is generally a problem concerned by customer in the purchase process. Usually most people prefer to choose the  UPS  which power backup the longer the better, in fact, this is not correct. We must firstly clear that the seller will usually have standard type UPS and long-acting UPS. Standard type UPS with built-in battery, after a power interruption can supply power to the load equipment in general for a few minutes to tens of minutes, of course, the length of time depends on the load. Long acting UPS can not only meet the power requirement of load, but also meet the requirements of customers and work types and so on, so the long-term UPS is usually equipped with an external battery pack. If the client is not particularly strict to the work condition of the load, and the power of the load is not particularly large, usually with standard type UPS would be enough. Because the choice of long backup time UPS is bound to increase the number of battery groups an...
阅读全文

126th Canton Fair

图片
On Oct 15th 2019, as one of the most important trade promotion platforms for Chinese enterprises to expand the global market, Canton Fair in Guangzhou focused on highlighting innovation driven, and “independent brand” became a high-frequency word of Canton Fair. Xu Bing, a spokesman for the Canton Fair and deputy director of the China Foreign Trade Center, said that the domestic and foreign environment faced by China’s foreign trade development this year is more complex and uncertain. The majority of exhibitors accelerated quality improvement and innovation, and continued to make efforts in technology research and development, product innovation, brand cultivation, etc., with high technology, high quality, high added value and independent brand products emerging. Many independent innovative R & D products are welcomed by the market. At the same time, purchasers are less sensitive to price and pay more attention to the technology, brand, quality and service of products. In ...
阅读全文

How to maximize the efficiency of your UPS

图片
1.Use of AC voltage regulator After using  UPS power supply , there is no need to add AC voltage regulator. If it must be added, it should be added to the front level of UPS, that is, the mains power first passes through the AC voltage regulator, then through the ups, and then to the load. 2.Battery balanced charging skills At present, valve regulated lead-acid battery (VRLA) used in many ups power supply is called maintenance free battery from the beginning, which gives users a misunderstanding that it seems that this battery is durable and does not need maintenance at all. Under this kind of misleading, many users have not carried out maintenance and management since they installed the battery. When the battery in UPS power supply meets the following conditions, the battery shall be charged evenly: when the terminal voltage is lower than the specified calibration voltage due to excessive discharge. For 12 V small sealed lead-acid batteries, the discharge calibration voltage is...
阅读全文