Off grid solar power system

Photovoltaic technology can provide clean, safe and reliable renewable energy, low operating cost, minimum maintenance requirements, zero fuel cost and long service life (more than 20 years). These advantages makes the off grid photovoltaic applications technically feasible and economically competitive. Solar power generation has been proved to be able to meet the social needs of future energy sources, and is a non polluting power generation mode. 450000 off grid solar systems (typical 35-100Wp capacity) have been installed in India; In developing countries, such as Nepal (61%) the majority of the population without electricity, the government has to give priority to rural areas, suburban electrification, and solar power generation network technology is one of the most widely used power generation technology.
One of the typical examples of off grid PV applications is the 1kW PV array of the VanGeet off grid photovoltaic base in Colorado, USA.
In this case, extending 1.5 miles to the building of power network at an estimated cost of $100000, of which, including amorphous silicon PV array with MPPT solar charge controller, 42.7kWh inverter battery combination 4kW, those with high efficiency building design combined, proved in economy and environmental protection are very successful.
Photovoltaic application in 2010 global shipping has been more than 16GWp, the market accounted for 87% of crystalline silicon material. Although the efficiency of world class polycrystalline silicon batteries has been reported to be as high as 20.3%, the efficiency of the typical commodity silicon module is only 13.4%, but it is still selected as the basis for this research. Because of the PV array power requirements provided by solar photons, the photovoltaic array does not power at night, electric power in cloudy or overcast local climate below the peak, the PV array with discontinuity. In order to ensure the continuity of off grid PV applications, these factors require battery energy storage.
The DC output from the PV array is firstly converted into AC (DC-AC) through the inverter, and the published inverter efficiency range is 85.8%-92.4% (maximum efficiency). However, when the polysilicon PV array is used, the total system efficiency of the inverter is about 10%. Under such a low conversion efficiency, the loss associated with the inverter should be minimized.

SOROTEC Solar MPPT Charge Controller 60A 3200W 12V 24V 48V

1. Intelligent maximum power point tracking technology increases efficiency 25%~30%
2. Compatible for PV systems in 12v, 24v or 48v
3. Three-stage charging optimizes battery performance
4. Maximum charging current up to 60a
5. Maximum efficiency up to 98%
6. Battery temperature sensor (BTS) automatically provides temperature compensation
7. Support wide range of lead-acid batteries including wet, AGM, and gel batteries
8. Multi-function LCD displays detailed information

评论

发表评论

此博客中的热门博文

Correct selection of backup time for UPS

图片
UPS backup time is generally a problem concerned by customer in the purchase process. Usually most people prefer to choose the  UPS  which power backup the longer the better, in fact, this is not correct. We must firstly clear that the seller will usually have standard type UPS and long-acting UPS. Standard type UPS with built-in battery, after a power interruption can supply power to the load equipment in general for a few minutes to tens of minutes, of course, the length of time depends on the load. Long acting UPS can not only meet the power requirement of load, but also meet the requirements of customers and work types and so on, so the long-term UPS is usually equipped with an external battery pack. If the client is not particularly strict to the work condition of the load, and the power of the load is not particularly large, usually with standard type UPS would be enough. Because the choice of long backup time UPS is bound to increase the number of battery groups an...
阅读全文

126th Canton Fair

图片
On Oct 15th 2019, as one of the most important trade promotion platforms for Chinese enterprises to expand the global market, Canton Fair in Guangzhou focused on highlighting innovation driven, and “independent brand” became a high-frequency word of Canton Fair. Xu Bing, a spokesman for the Canton Fair and deputy director of the China Foreign Trade Center, said that the domestic and foreign environment faced by China’s foreign trade development this year is more complex and uncertain. The majority of exhibitors accelerated quality improvement and innovation, and continued to make efforts in technology research and development, product innovation, brand cultivation, etc., with high technology, high quality, high added value and independent brand products emerging. Many independent innovative R & D products are welcomed by the market. At the same time, purchasers are less sensitive to price and pay more attention to the technology, brand, quality and service of products. In ...
阅读全文

How to maximize the efficiency of your UPS

图片
1.Use of AC voltage regulator After using  UPS power supply , there is no need to add AC voltage regulator. If it must be added, it should be added to the front level of UPS, that is, the mains power first passes through the AC voltage regulator, then through the ups, and then to the load. 2.Battery balanced charging skills At present, valve regulated lead-acid battery (VRLA) used in many ups power supply is called maintenance free battery from the beginning, which gives users a misunderstanding that it seems that this battery is durable and does not need maintenance at all. Under this kind of misleading, many users have not carried out maintenance and management since they installed the battery. When the battery in UPS power supply meets the following conditions, the battery shall be charged evenly: when the terminal voltage is lower than the specified calibration voltage due to excessive discharge. For 12 V small sealed lead-acid batteries, the discharge calibration voltage is...
阅读全文