Partial performance introduction of high frequency UPS

Excellent electrical performance

Low input harmonic current: <5%
Output voltage high precision: <2%
Overload capacity: 110 ~ 130% of the load can be overloaded for 10 minutes, 130 ~ 150% of the load can be overloaded for 1 minutes
Charging current: 4.5A (each module)
Support frequency conversion mode 50Hz input, 60Hz output or 60Hz input, 50Hz output

Digital control

High frequency UPS adopts the most advanced DSP as the central controller, its powerful computing capabilities can realize the traditional function in most of the UPS now by software, not
only greatly improve the accuracy and reliability, and easy to upgrade and maintenance.

Intelligent charging

Modular high frequency machine adopts advanced three phase charging method:
The first phase of large current is constant current charging, fast recharge about 90% of the electricity;
Second phase is pulse charging, can fully charge the battery;
Third phase is the constant pressure to maintain, to ensure that the electricity does not lose.
This can be a good balance between fast charging and prolonging the life of the battery, saving the battery cost for the user.

N+X wireless parallel redundancy

Using advanced wireless parallel control technology, compared to the wired parallel to reduce the single point of failure ( can work even if the steady-state operation of the line fault), but also
improve the reliability.

Parallel battery

Modular high frequency UPS adopts the double cell input structure and advanced control strategy, and the 6 kva online UPS system fully share the same set of battery, which greatly saves the cost of the battery.

评论

发表评论

此博客中的热门博文

How to maximize the efficiency of your UPS

图片
1.Use of AC voltage regulator After using  UPS power supply , there is no need to add AC voltage regulator. If it must be added, it should be added to the front level of UPS, that is, the mains power first passes through the AC voltage regulator, then through the ups, and then to the load. 2.Battery balanced charging skills At present, valve regulated lead-acid battery (VRLA) used in many ups power supply is called maintenance free battery from the beginning, which gives users a misunderstanding that it seems that this battery is durable and does not need maintenance at all. Under this kind of misleading, many users have not carried out maintenance and management since they installed the battery. When the battery in UPS power supply meets the following conditions, the battery shall be charged evenly: when the terminal voltage is lower than the specified calibration voltage due to excessive discharge. For 12 V small sealed lead-acid batteries, the discharge calibration voltage is 10.
阅读全文

126th Canton Fair

图片
On Oct 15th 2019, as one of the most important trade promotion platforms for Chinese enterprises to expand the global market, Canton Fair in Guangzhou focused on highlighting innovation driven, and “independent brand” became a high-frequency word of Canton Fair. Xu Bing, a spokesman for the Canton Fair and deputy director of the China Foreign Trade Center, said that the domestic and foreign environment faced by China’s foreign trade development this year is more complex and uncertain. The majority of exhibitors accelerated quality improvement and innovation, and continued to make efforts in technology research and development, product innovation, brand cultivation, etc., with high technology, high quality, high added value and independent brand products emerging. Many independent innovative R & D products are welcomed by the market. At the same time, purchasers are less sensitive to price and pay more attention to the technology, brand, quality and service of products. In
阅读全文

Why the IDC needs to be equipped with UPS

图片
The equipment in  IDC  is very important. Servers, computers, monitoring and so on, all above need to be ensured normal power supply, especially the transmission and reception of data on the network. These are all used for servers, so the reliability of servers is guaranteed. Sudden power failure, instant voltage and current at incoming calls will be very high. Some precision equipment can be burnout through this instant impact.  UPS  has voltage stabilizing function and its existence protects the safety of these devices under such circumstances.The process of some work can not be blackout, such as operation, test, scientific research, charge and so on. These places must be protected by UPS power supply. The role of UPS power is to enable us to have enough time to store data in the case of some urgent outages, and also that is UPS. It is also the UPS’s voltage stabilizing function that can effectively protect the electrical safety of the equipment. How to choose UPS？ 1.Determine the
阅读全文